scw networker pro cameras in other subnet

To record video clips continuously during the first minute after the system triggers an alarm, select Record on Alarm. If you want the camera to record motion‑triggered clips only when the system is armed, choose Record Motion When Armed.ĭ.

If you want this camera to record video clips any time it detects motion, choose Always Record on Motion.Ĭ. Find the customer and select the relevant account number.In Video, enable SecureCom Cameras & NVR, then press Save.On the System Information page, press the Add Camera button and enter the camera’s 12‑digit MAC Address.If the camera image needs to be inverted due to mounting position, toggle Flip Image.To configure clip recording options, select Clips.Ī.If you don’t want this camera to record video clips any time it detects motion, choose Never Record Motion.ī. To lock the camera in place, tighten the adjustment screw with the L‑key.Īfter you’ve connected the camera to the network, activate it in Dealer Admin. Adjust the pan, tilt, and camera rotation angle as needed.ģ. Loosen the adjustment screw with the included L‑key.Ģ. Refer to Figure 5 when adjusting the camera.ġ. The mounting surface must be capable of holding five times the camera’s weight. Use the included screws and wall anchors to mount the camera base to a wall or ceiling.

Refer to Figure 4 when mounting the camera. Connect the cable to a PoE switch or injector. For compatible power supplies, refer to “Accessories”.Ĭonnect a network cable to the camera Ethernet connector.

Scw networker pro cameras in other subnet